Conditioned cut wire shot
Application areas
- Surface deformations
- Surface hardening (shot peening)
![](https://www.kuhmichel.com/uk/wp-content/uploads/sites/14/recycling-top.png)
I am recyclable!
We recycle your blasting and abrasive waste in our own recycling plant.
Conditioned cut wire shot is our specialist for shot peening. The rounding of the cylinder edges creates a conditioned grain which is classified as belonging to grain shapes G1, G2 and G3. Blasting with rounded steel wire shot is used to increase the load-bearing capacity and service life of dynamically stressed components such as springs, gears and shafts. A solidified surface significantly increases bending and torsional strength. We will be happy to help you.
PRODUCT FEATURES
Typical physical properties | |
---|---|
Hardness (norm) | +/- 640 HV (56 HRC) |
Grain shape | rounded |
Melting point | ca. 1.535 °C |
Specific gravity | ca. 7,4 g/cm3 |
Bulk density* | ca. 4,4 – 4,8 g/cm3 |
*depending on grain size
Typical chemical analysis | |
---|---|
C | 0,73 – 0,78 % |
Mn | 0,50 – 0,80 % |
Si | 0,10 – 0,30 % |
P | max. 0,035 % |
S | max. 0,035 % |
Fe | Remainder |
Available sizes
Metric Diameter (mm) |
|
---|---|
0,3 | |
0,4 | |
0,5 | |
0,6 | |
0,7 | |
0,8 |
Metric Diameter (mm) |
|
---|---|
0,9 | |
1,0 | |
1,2 | |
1,4 | |
1,6 |
Other grain sizes can be produced if required.
Blasting systems
Pressure blast machines
Wheel blast machines
Packaging
25 kg bags on 1t pallets
1 ton loose in a big bag
SPECIFICATION
EN ISO 11124-5
DIN 8201-4
SAE J441
AMS 2431/3
AMS 2431/8
VDFI 8001
Contact
Any Questions?
This site is protected by Google reCAPTCHA.We use an extra cookie for its essential functionality.Please click on “Agree” to accept.
![](https://www.kuhmichel.com/uk/wp-content/uploads/sites/14/2018/10/Automotive_Benjamin_EK_Expert.jpg)