Aluminium Cut Wire
Application areas
- Blast cleaning
- Deburring
- Surface finish
I am recyclable!
We recycle your blasting and abrasive waste in our own recycling plant.
In producing our aluminium cut wire to be inert, we already meet the increasing demands of the aluminium casting and forging industries. Further advantages of this homogenous cut wire are the protection of the blasting equipment, economic efficiency and compliance with low roughness requirements. Deburring of magnesium castings is also possible with this material. We will be happy to help you.
PRODUCT FEATURES
| Physical properties | |
|---|---|
| Hardness | approx. 100 – 150 HV0,1 |
| Grain shape | cylindrical/rounded |
| Melting Point | ca. 630 °C |
| Specific gravity | approx. 2,7 g/cm3 |
| Bulk density* | approx. 1,7 g/cm3 |
*depending on granular size
| Typical chemical analysis | ||
|---|---|---|
| EN AW-5056 | EN AW-6060 nach DIN 573-3 | |
| Si | 0,30 – 0,60 % | 0,30 – 0,60 % |
| Fe | 0,10 – 0,70 % | 0,10 – 0,30 % |
| Cu | max. 0,10 % | 0,10 % |
| Mn | 0,10 – 0,60 % | 0,10 % |
| Mg | 3,00 – 7,00 % | 0,35 – 0,60 % |
| Cr | max. 0,30 % | 0,05 % |
| Zn | max. 0,30 % | 0,15 % |
| Ti | max. 0,30 % | 0,10 % |
| Andere | 0,15 % | 0,10 % |
| Al | rest | rest |
Available grain sizes
| Metric
Diameter (mm) |
|
|---|---|
| 0,6 | |
| 0,8 | |
| 1,0 | |
| 1,2 | |
| 1,6 |
Other grain sizes can be produced on request.
Blasting systems
Pressure blast systems
Wheel blasting systems
Injector blast cabinets
Packaging
10 kg sacks on pallet up to 500 kg
500 kg / 1 t loose in a big bag
Contact
Any Questions?
This site is protected by Google reCAPTCHA.We use an extra cookie for its essential functionality.Please click on “Agree” to accept.
