Application areas

  • Blasting
  • Derusting
  • Descaling
  • Paint stripping
  • Preparation for surface coating
  • Rough blasting

I am recyclable!

We recycle your blasting and abrasive waste in our own recycling plant.

More info

Steel shot angular is available in three hardness classes: GH, GL and GP. It can be used in compressed air blasting machines and also in wheel blasting systems – preferably with wear protection. Depending on the degree of hardness, this abrasive will sooner or later round off in the operating mixture. Steel shot angular is ideally suited for cleaning, roughening, descaling and for blasting as preparation before coating metallic workpieces. We will be happy to help you.

PRODUCT FEATURES

Typical physical properties
Hardness GP 40 – 53 HRC (390 – 550 HV)
Hardness GL 54 – 60 HRC (570 – 720 HV)
Hardness GH > 61 HRC (> 740 HV)
Grain shape angular
Melting point ca. 1.535 °C
Specific gravity ca. 7 g/cm3
Bulk density* ca. 4,0 – 4,6 g/cm3
Microstructure martensitic

*depending on grain size

Typical chemical analysis
C 0,80 – 1,20 %
Mn 0,35 – 1,20 %
Si 0,40 – 1,50 %
S max. 0,05 %
P max. 0,05 %
Fe Remainder

Available sizes

Designation

Average grain size (mm)

G 12 1,7 – 2,4
G 14 1,4 – 2,0
G 16 1,0 – 1,7
G 18 0,7 – 1,4
G 25 0,4 – 1,2
Designation

Average grain size (mm)

G 40 0,3 – 1,0
G 50 0,2 – 0,7
G 80 0,1 – 0,4
G 120 0,1 – 0,3

Other grain sizes can be produced if required.

Blasting systems

Pressure blast machines (GH)

Wheel blast machines (GL, GP)

Wheel blast machines (wear protection recommended)

Packaging

25 kg bags on 1t pallets

1 ton loose in a big bag

SPECIFICATION

EN ISO 11124-3

DIN 8201-3

SAE J444

SAE J993

Contact

Any Questions?

Privacy

This site is protected by Google reCAPTCHA.We use an extra cookie for its essential functionality.Please click on “Agree” to accept.

agree