Application areas

  • Blast cleaning
  • Deburring
  • Surface finish

I am recyclable!

We recycle your blasting and abrasive waste in our own recycling plant.

More info

In producing our aluminium cut wire to be inert, we already meet the increasing demands of the aluminium casting and forging industries. Further advantages of this homogenous cut wire are the protection of the blasting equipment, economic efficiency and compliance with low roughness requirements. Deburring of magnesium castings is also possible with this material. We will be happy to help you.

PRODUCT FEATURES

Physical properties
Hardness approx. 100 – 150 HV0,1
Grain shape cylindrical/rounded
Specific gravity approx. 2,7 g/cm3
Bulk density* approx. 1,7 g/cm3

*depending on granular size

Typical chemical analysis
  EN AW-5056 EN AW-6060 nach DIN 573-3
Si 0,30 – 0,60 % 0,30 – 0,60 %
Fe 0,10 – 0,70 % 0,10 – 0,30 %
Cu max. 0,10 % 0,10 %
Mn 0,10 – 0,60 % 0,10 %
Mg 3,00 – 7,00 % 0,35 – 0,60 %
Cr max. 0,30 % 0,05 %
Zn max. 0,30 % 0,15 %
TI max. 0,30 % 0,10 %
Andere 0,15 % 0,10 %
Al rest rest

Available grain sizes

Metric

Diameter (mm)

0,6
0,8
1,0
1,2
1,6

Other grain sizes can be produced on request.

Blasting systems

Pressure blast systems

Wheel blasting systems

Injector blast cabinets

Packaging

10 kg sacks on pallet up to 500 kg

500 kg / 1 t loose in a big bag

Contact

Any Questions?

Privacy

12 + 14 =