Application areas

  • Blast cleaning
  • Cast plastering
  • Descaling
  • Sand removal

Cylindrical cut wire shot is cut from a drawn wire. The highest energy transfer among the abrasive materials can be achieved with wire grain. The precise geometry and the compacted structure offer maximum impact strength. The cylinder edge also creates aggressiveness and enables good cleaning of the surface even with stubborn scale. We will be happy to help you.

PRODUCT FEATURES

Typical physical properties
Hardness (norm) +/- 450 HV (44 HRC)
Grain shape cylindrical
Melting point ca 1.535 °C
Specific gravity ca. 7,4 g/cm3
Bulk density* ca. 3,9 – 4,9 g/cm3

*depending on grain size

Typical chemical analysis
C 0,45 – 0,60 %
Mn 0,40 – 0,70 %
Si 0,05 – 0,22 %
P max. 0,05 %
S max. 0,05 %
Fe Remainder

Available sizes

Metric

Diameter (mm)

0,4
0,6
0,8
0,9
1,0
1,2
1,5

Metric

Diameter (mm)

1,6
1,8
2,0
2,2
2,4
2,6

Other grain sizes can be produced if required.

Blasting systems

Pressure blast machines

Wheel blast machines

Packaging

25 kg bags on 1t pallets

1 ton loose in a big bag

SPECIFICATION

EN ISO 11124-5

DIN 8201-4

Contact

Any Questions?

Privacy

This site is protected by Google reCAPTCHA.We use an extra cookie for its essential functionality.Please click on “Agree” to accept.

agree

contact contact
close
Beratung
  • +49 2102 93979-0
  • vertrieb@kuhmichel.com
Recycling
  • +49 39483 9765-0
  • recycling@kuhmichel.com
Consulting
  • +49 2102 93979-0
  • vertrieb@kuhmichel.com
Recycling
  • +49 39483 9765-0
  • recycling@kuhmichel.com
Conseil
  • +33 6 81 19 35 38
  • france@kuhmichel.com
Recyclage
  • +49 39483 9765-0
  • recycling@kuhmichel.com