Cast stainless steel angular Cr grit
Application areas
- Blast cleaning
- Creation of anti-slip surfaces in the stone industry
- Descaling
- Micro blasting
- Paint stripping
- Preparation for surface coating
- Reusable abrasive
- Structural blasting
- Sweep blasting of zinc-plated parts
I am recyclable!
We recycle your blasting and abrasive waste in our own recycling plant.
Due to its exceptionally long service life, cast stainless steel angular Cr grit can be a worthwhile alternative to an iron-free, mineral-based abrasive. The angular grain shape makes it possible to prepare stainless materials for a subsequent surface coating. We will be happy to help you.
PRODUCT FEATURES
| Typical physical properties | |
|---|---|
| Hardness | +/- 59 HRC (710 HV) |
| Grain shape | angular |
| Melting point | ca. 1.450 – 1.500 °C |
| Specific gravity | ca. 7,0 g/cm3 |
| Bulk density* | ca. 4,0 – 4,2 g/cm3 |
*depending on grain size
| Typical chemical analysis | |
|---|---|
| Cr | 27,00 – 30,00% |
| C | 1,95 – 2,20% |
| Si | 1,80 – 2,20% |
| Mn | 0,70 – 1,20% |
| Ni | 0,00 – 0,50% |
Available sizes
| Designation
Average grain size (mm) |
|
|---|---|
| DELTA 010 | 1,7 – 2,5 |
| DELTA 012 | 1,4 – 2,0 |
| DELTA 014 | 1,2 – 1,7 |
| DELTA 016 | 1,0 – 1,4 |
| DELTA 018 | 0,7 – 1,2 |
| Designation
Average grain size (mm) |
|
|---|---|
| DELTA 025 | 0,4 – 1,0 |
| DELTA 040 | 0,3 – 0,8 |
| DELTA 050 | 0,2 – 0,6 |
| DELTA 080 | 0,1 – 0,3 |
| DELTA 120 | 0,0 – 0,2 |
Other grain sizes can be produced if required.
Blasting systems
Pressure blast machines
Wheel blast machines
Packaging
25 kg bags on 1t pallets
1 ton loose in a big bag
Contact
Any Questions?
This site is protected by Google reCAPTCHA.We use an extra cookie for its essential functionality.Please click on “Agree” to accept.
