Steel shot angular
Application areas
- Blast cleaning
- Descaling
- Paint stripping
- Preparation for surface coating
- Rough blasting
- Rust removal
I am recyclable!
We recycle your blasting and abrasive waste in our own recycling plant.
Steel shot angular is available in three hardness classes: GH, GL and GP. It can be used in compressed air blasting machines and also in wheel blasting systems – preferably with wear protection. Depending on the degree of hardness, this abrasive will sooner or later round off in the operating mixture. Steel shot angular is ideally suited for cleaning, roughening, descaling and for blasting as preparation before coating metallic workpieces. We will be happy to help you.
PRODUCT FEATURES
| Typical physical properties | |
|---|---|
| Hardness GP | 40 – 53 HRC (390 – 550 HV) |
| Hardness GL | 54 – 60 HRC (570 – 720 HV) |
| Hardness GH | > 61 HRC (> 740 HV) |
| Grain shape | angular |
| Melting point | ca. 1.535 °C |
| Specific gravity | ca. 7 g/cm3 |
| Bulk density* | ca. 4,0 – 4,6 g/cm3 |
| Microstructure | martensitic |
*depending on grain size
| Typical chemical analysis | |
|---|---|
| C | 0,80 – 1,20 % |
| Mn | 0,35 – 1,20 % |
| Si | 0,40 – 1,50 % |
| S | max. 0,05 % |
| P | max. 0,05 % |
| Fe | Remainder |
Available sizes
| Designation
Average grain size (mm) |
|
|---|---|
| G 12 | 1,7 – 2,4 |
| G 14 | 1,4 – 2,0 |
| G 16 | 1,0 – 1,7 |
| G 18 | 0,7 – 1,4 |
| G 25 | 0,4 – 1,2 |
| Designation
Average grain size (mm) |
|
|---|---|
| G 40 | 0,3 – 1,0 |
| G 50 | 0,2 – 0,7 |
| G 80 | 0,1 – 0,4 |
| G 120 | 0,1 – 0,3 |
Other grain sizes can be produced if required.
Blasting systems
Pressure blast machines (GH)
Wheel blast machines (GL, GP)
Wheel blast machines (wear protection recommended)
Packaging
25 kg bags on 1t pallets
1 ton loose in a big bag
SPECIFICATION
EN ISO 11124-3
DIN 8201-3
SAE J444
SAE J993
Contact
Any Questions?
This site is protected by Google reCAPTCHA.We use an extra cookie for its essential functionality.Please click on “Agree” to accept.
